1. Home
  2. /
  3. Tech support
  4. /
  5. Technology
  6. /
  7. OUBER Axial Fixed Air...

OUBER Axial Fixed Air Cooler Install Drawing

The installation specification

1.Installation location choice

a.If conditions allow, install OUBER air cooler main machine on the top of the building.

b.If outdoor air quality is good, OUBER air cooler best selected to install the shortest duct installation environment.

c.If conditions allow, OUBER air cooler hang on the wall to install, and the position should not placed material below. Do not install beside the air outlet which may produce a water vapor, odor or bad smell, like : steam the eliminator, toilet, kitchen, etc.

d.If the cooling room is not enough the door or window (2m2 /unit),in need to install strong exhaust fan, the displacement is more than the OUBER air cooler 70% air volume.

e.To ensure that installation can support the frame structure of the whole environmental protection OUBER air cooler main machine and duct and more than two times the weight of the installation personnel, ensuring the security of the project and use;

f.The OUBER air cooler main machine must be the overall level of installation, make a prevention measures to confront powerful typhoon, mounting bracket must be bear the weight of more than 250 kg, more than 3 meters from the ground mounting bracket should add the barriers. As far as possible using tap water, the water quality must be kept clean. The hard water should softening,drain pipe should be connected the sewer, and keep clear.

2.Point cooling

a.Duct materials used thickness over 0.6 mm hot galvanized steel sheet, double-sided plate shall be marked on the stiffeners.

b.Tuyere set above the staff positions,tuyere size selection depend on wind pressure,air volume and wind angle,with the wind plate of tuyere is convenient to adjust air flow, realize the wind tsui wind speed, air volume balance;

c.The specifications of duct of the generally rated flow rate method is used to design, the main duct in wind speed 8~10 m/s, the end of the duct keep 1.5~2 m/s wind speed.

3.Whole cooling

a.Whole cooling engineering should choice axial machine , try to used elbow to direct supply air.

b.To a quiet place, should form a complete set of sound attenuation bend duct is used.

Please let’s know your enquiry and we’ll reply you within 24 hours


OUBER Air Cooler & Ventilation Co., Ltd.

Addr.: No.2/32, East Road, Xiashi Industrial Zone, Lunjiao, Shunde, Foshan, Guangdong, China.
Tel: +86 0757 2362 3068
OEM: +86 0757 2223 1278
Fax: +86 0757 2362 3061
Email: aircooler@ouber.com

Click to visit OUBER on Facebook
Scan the pop up QR code to visit OUBER mini app on Tencent  Wechat
Click to visit OUBER store on Alibaba.com

Web: www.ouber.com

Annie Huang (Sales manager)

Annie Huang (Sales manager)
Cel: +86-139 0256 8863
Tel: +86-0757-2362 3068
Email: aircooler@ouber.com

Lucy Luo (Sales manager)

Lucy Luo (Sales manager)
Cel: +86 180 3887 9175
Tel: +86-0757-2223 1278
Email: Lucy@ouber.com

Fiona Wang(Sales Assistant)
Cel: +86 180 2817 1738
Tel: +86-0757-2362 3068
Email: Fiona@ouber.com

© OUBER Air Cooler & Ventilation Co., Ltd., 2005 ~ 2023. All rights reserved.
This website is the only official website of OUBER Air Cooler & Ventilation Co., Ltd.